Update infinity6b0.dtsi#27
Open
sansarus wants to merge 1 commit intoOpenIPC:sigmastar-infinity6b0from
Open
Conversation
with pad = <PAD_UART0_TX> impossible to pinmux FUART (ttyS2). Any echo / cat to /dev/ttyS2 and /dev/ttyS1 reset control register (0x1f203C0C) to 0x10 and 0x100. with pad = <PAD_FUART_TX> ttyS2 muxed to FUART_TX by echo > /dev/ttyS2 and can be fully controled by 0x1f203C0C. ttyS1 also controlled by 0x1f203C0C (0x20 for ttyS2 at 43/43 pins, 0x200 for ttyS1 at 45/46 pins, 0x0 - gpio modes, SSC335) also this DT workable at ssc335DE. Tested at ANJ MS-J10 pcb and UNV-RT 8283swc-we-b
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
with pad = <PAD_UART0_TX> impossible to pinmux FUART (ttyS2). Any echo / cat to /dev/ttyS2 and /dev/ttyS1 reset control register (0x1f203C0C) to 0x10 and 0x100.
with pad = <PAD_FUART_TX> ttyS2 muxed to FUART_TX by echo > /dev/ttyS2 and can be fully controled by 0x1f203C0C. ttyS1 also controlled by 0x1f203C0C
(0x20 for ttyS2 at 43/43 pins, 0x200 for ttyS1 at 45/46 pins, 0x0 - gpio modes, SSC335)
also this DT workable at ssc335DE.
Tested at ANJ MS-J10 pcb and UNV-RT 8283swc-we-b