Feature Request: PG threads

[remcomeeder]

In industrial environments the PG thread is still something I regularly encounter, especially the PG 13.5 thread size.
Can PG threads be added?

https://www.britishmetrics.com/images/pdf/technical/pgstd_4.htm
https://www.sealconusa.com/catalog/srf_e/strain-relief-catalog-56.pdf

[mwganson]

I don't think so. The workbench, the way it is built, depends on the threads to be scalable, meaning you can input diameter and pitch and the formula can take those and scale a standard 1mm pitch to make it all work, but I don't think these are scalable. PG threads are also being phased out, although you still will encounter them in legacy equipment, not that that is relevant to the discussion. I would support them if I could do it easily.

[remcomeeder]

Thanks for the information.
The threads are still widely used and will be used for far into the future, at least the PG13.5 which is the standard for a lot of analytical sensors like pH electrodes, oxygen sensors, etc. They were designed with PG13.5 and due to the installed base it basically can't be changed easily.